|
|
Ball Sorting Manipulator Driven by PLC
Mareček, Petr ; Matoušek, Radomil (referee) ; Knispel, Lukáš (advisor)
This thesis deals with using PLC (Programmable Logic Controler) for sorting colored balls using the color sensor. Theoretical part also describes principle of operation elements ball-sorting manipulator and presents the types of programming languages. Practical part describes the construction of the mechanism created in software Autodesk Inventor and solution of the electronic compoments, circuits. Finally, introduces the reader programming in ANSI C and the software Bernecker&Rainer Automation Studio.
|
|
|
PLC Control of Mobile Robotics Platform
Konečný, Michael ; Lang, Stanislav (referee) ; Matoušek, Radomil (advisor)
The aim of this master's thesis was to create a design for a prototype of a mobile robotic platform and its physical fabrication. Another goal of this master's thesis was to develop a control algorithm and its implementation into a prototype. In addition, the thesis was extended by an autonomous motion mode, an algorithm for robot path planning, and the design of the Human Machine Interface (HMI). The introduction contains a description of some already created mobile robotic platforms, a presentation of the company B&R and the theory needed to understand omnidirectional mobility. The next chapters describe the design and construction of a prototype with a selection of electronic components and their wiring, implementation of an algorithm for robot path planning, implementation of a control algorithm and design, together with the implementation of the user environment. At the end of this master's thesis, the possibilities of extending the project to future years are described.
|
|
|
Industrial PID controller with autotuning and visualisation
Vávra, Pavel ; Dvořáček, Martin (referee) ; Pivoňka, Petr (advisor)
This thesis deals with implementation of industrial used controlling block into Power Panel equipment of B&R in integrated development environment Automation Studio 3.0.71. It is PID controller with autotuner and visualization, which allowed bumpless transfer among controlling algorithms and manual control. PID and I-PD controllers with filtering of derivative action and dynamic antiwindup were implemented. Parameters of PID controller is possible to tune with the aid of ultimate gain and ultimate period according rules of Ziegler-Nichols. Ultimate parameters of controlled plant is possible to acquire with the aid of two identification methods, recursive least squares method and relay feedback. Recursive least squares method was implemented with directional forgetting. For relay feedback were used two types of relays: ideal and saturation relay for improving accuracy of searched ultimate values. The whole solution is programmed in ANSI C which Automation Studio supports. Created controller is control with the aid of touchscreen which is integrated in Power Panel. Trends of process values are viewed on the screen too. For comparison adaptive controller by B&R was implemented. This contoller is standardly supplied with Automation Studio in LoopConR library. All created algorithms were first validated on mathematical model of plant and then on real model in laboratory. The first part of thesis deals with theoretic analysis of used methods. The practical realization is described in the second part of this diploma thesis.
|
|
|
Tool for easier automation visualisation creation in mapp View technology
Kseňak, Ján ; Lang, Stanislav (referee) ; Poliščuk, Radek (advisor)
The aim of the bachelor thesis is create a program that will simplify development of automation visualizations using mappView technology in the development environment B&R Automation studio. The theoretical part of thesis contains more detailed description of mappView technology and its necessary components. At the beginning of the practical part is mentioned a selection of technologies that were used in development of the application, which should simplify development of mappView visualizations. Furthermore, in the practical part, we describe the architecture of application, the process of creating application, the design of a graphical user interface of application and the integration of application in the development environment B&R Automation studio. The last chapter shows the whole process of developing mappView visualizations in the development environment B&R Automation studio and the use of application in this process.
|
|
|
Slitter rewinder control
Růžička, Kamil ; Pásek, Jan (referee) ; Richter, Miloslav (advisor)
This diploma thesis deals with the control of unwinding and winding tension sections on the slitter rewinder for packaging material. The essay was created in collaboration with SOMA company, which provided a machine for testing and measuring. The theoretical part describes the function of bitter rewinder, possible mechanical approaches of control the tension sections, and real mechanics of control on our machine. The next part explores selected hardware and its use on the rewinder. Further chapters are focused on the individual measuring chains, calibration, computations of required quantities and control algorithms. The last part compares the theoretical and measured values and evaluates the results of this essay.
|
|
|
Model of electric furnance for heat-resistant material processing
Franek, Lešek ; Malounek, Petr (referee) ; Dvořáček, Martin (advisor)
Content of the document is to create model of kiln, compare result with the real kiln. There is described 3D design in SolidWorks application, creation of a physical model in COMSOL Multiphysics and its export to Simulink. Subsequently is described the Simulink scheme, functions of program parts and visualization in B&R Automation Studio. The obtained results are compared with measured values. There is also described the design of a controller with a off-line identification.
|
|
|
ABB RobotStudio - robot control using PLC B&R Automation
Mittaš, Eduard ; Lacko, Branislav (referee) ; Lang, Stanislav (advisor)
The goal of this bachelor thesis is to demonstrate various ways of communication with the controller of the robot as well as consecutive controlling of this robot. The simulation will be achieved by using the TCP/IP protocol, while the communication in the laboratory with real equipment will be assured by Profinet bus. This thesis will show also another solution, which is simple communication and connection between Microsoft Visual Studio and Robotstudio by using TCP/IP protocol. Initial chapters will describe ABB and B&R Automation companies, their control systems, history and information associated with them. Following chapters will serve as a guide describing creating of application in each of three presented solutions.
|
|
|
Universal Measurement Station
Šantavý, Marek ; Bartoš, Pavel (referee) ; Šimek, Václav (advisor)
The aim of this thesis is to create data acquisition application. The software module is designed for the industrial panel PC. Power Panel 520 from Bernecker + Reiner and the data acquisition board NI USB-6215 from National Instruments represent the fundamental hardware components for this project. Data acquisition and visualization tasks are controlled by a standalone application made in LabVIEW 2011. OPC, industrial standard in communication, is responsible for mutual interconnection between control (PLC) and data acquisition part. Network shared variables and Apple iPad 2 allow remote surveillance for operator. Finally, the creation of user-friendly interface and integration of technologies from different vendors, are main goals of this project.
|
|
| |
|
|
PLC systems in education process
Král, Radek ; Ctibor, Jiří (referee) ; Červinka, Dalibor (advisor)
The bachelor thesis deals with programmable logic controllers for teaching. The thesis is divided into six chapters. The first chapter describes the basic programming languages as well as their resolution with graphical preview. The second chapter deals with programming environment GX Works2 from Mitsubishi Electric. Chapters three and four describe the SoMachine programming environment from Schneider Electric and Automation Studio from B&R. The fifth chapter of this bachelor thesis compares individual programming environments from the perspective of a common user. Nine laboratory tasks are proposed in the final part. For each lab task, a lab tutorial is created, and for most, an example of a logical program and visualizations.
|
guest ::
